ASTM A554 201 Stainless Steel Welded Pipe with Matt Surface for
Decorative and Industrial
The piping system consists of rigid steel pipes and shut-off valves
used to carry fluids to various parts of the building. Pipe systems
transport heating and cooling, wastewater, drinking water, etc.,
and are vital to public health and environmental sanitation.
Plumbers use tools such as pipe wrenches, pipe benders, etc. to
perform installation and maintenance. The stainless steel pipes and
fittings produced by FLK can be formulated according to various
governments or institutions to ensure pipeline safety and high
quality.
Product introduction:
| Commodity | ASTM A554 201 Stainless Steel Welded Pipe with Matt Surface for
Decorative and Industrial |
| Grade | 201 |
| Brand | No brand |
| Certification | SGS,BV,IQI,TUV,ISO,etc |
| Wall Thickness | 0.3-3mm |
| Outside diameter | 6-101.6mm |
| Length | 1000-6000mm |
| Surface | matt surface |
| Technique | welded |
| Standard | ASTM,AISI,SUS,JIS,EN,DIN,GB, ASME,etc |
| Delivery time | About 15 -30 days or based on the sales contract |
| MOQ | 1 Ton |
| Advantages | Stainless steel pipe applies to petroleum, chemical industry,
electric power, boiler ,high temperature resistant low temperature
resistant ,corrosion resistant seamless steel pipe used. Stainless
steel pipe and other material can be made according to the
customers’ requirements. |
The characteristic of 201 stainless steel seamless tube is
acid-resisting, alkali-resistance, high density, no bubbles by
polishing, no pinhole and etc., It is high-quality material in the
production of various straps and covers.
Chemical Composition:
| Grade | Chemical Composition (WT %) |
|
| Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel |
| 201 | ≤ 0.15 | 5.50-7.50 | ≤ 0.050 | ≤ 0.030 | ≤ 1.00 | 16.00 to 18.0 | 0.8-1.0 |
Physical Property:
| Physical Property |
| Tensile Strength(MPa) | Yield Strength(MPa) | Elongation(%) | Elastic Modulus | Hardness | Density |
≥520 | ≥205 | ≥40 | / | HRB<183 | 7.93g/cm3 |
The following table is the size of the stainless steel seamless
tube. For any other detail information, please feel free to contact
us.
Typicall material :
| Seamless and redrawn | | |
| ASTM Grade | UNS no. | Condition | Specifications |
| 304 | S30400 | Hard | AMS 5566/5564 |
| 304 | S30400 | Hard | MILT 5695 |
| 304 | S30400 | Hard | LN 9396 |
| 304 | S30400 | Hard | LN 9398 |
| 304 | S30400 | Annealed | MILT 8504 |
| 304L | S30403 | Hard | AMS 5569 |
| 304L | S30403 | Hard or annealed | AIR 9164 |
| 304L | S30403 | Hard or annealed | AIR 9160 |
| 304L | S30403 | Annealed | AIR 9423 |
| 304L | S30403 | Annealed | AIR 9424 |
| 321 | S32100 | Annealed | AMS 5645, AMS 5557/5570 |
| 321 | S32100 | Hard or annealed | AIR 9164 |
| 321 | S32100 | Hard or annealed | AIR 9160 |
| 321 | S32100 | Annealed | AIR 9423 |
| 321 | S32100 | Annealed | AIR 9424 |
| 321 | S32100 | Annealed | BSI T67 |
| 321 | S32100 | Annealed | LN 9396 |
| 321 | S32100 | Annealed | MILT 8808 |
| 321/347 | S34700 | Annealed | LN 9398 |
| 347 | S34700 | Annealed | AMS 5571/5556 |
| 347 | S34700 | Hard | BSI T68 |
Surface grit :
Packaging:
ASTM A554 201 Matt Surface Stainless Steel Welded Pipe SS Round
Tube packing details :
1: Pipes be covered with waterproof protective packing materials;
2: Then be bundled with strips together;
3: Well loaded and be transported to the loading port.
The inner size container as below:
1:20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM
;
2:40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM ;
3:40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM.
Product Show:
WHY CHOOSE US:
Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will
show you the photos of products and package before you pay the
balance.
Q2: what is the terms of delivery?
A: FOB, CIF, CFR,
Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or
belts, we could also pack the goods as the customers' requirement.
Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within
7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after
receiving the deposit.
Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique
drawings, we could build the mold and fixtures.
Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is
available in stocks, however, the the transportation fee is borne
by buyer.
