0.5 mm stainless steel sheet with Low Carbon Content and Good
Weldability
304 Stainless steel cold-rolled plate is a high-temperature
stainless steel material, whose chemical composition is mainly
iron, chromium, nickel, and molybdenum. 304 Stainless steel
cold-rolled sheet has good corrosion resistance, high temperature
resistance, and wear resistance, and can work stably for a long
time in high temperature environments.
Product introduction:
| Commodity | 0.5 mm stainless steel sheet with Low Carbon Content and Good
Weldability |
| Grade | 300 serious |
| Brand | TISCO ,BAOSTEEL,POSCO,JISCO,LISCO |
| Certification | SGS,BV,IQI,TUV,ISO,etc |
| Thickness | 0.3-3mm |
| Width | 1000mm,1219mm,1500mm as per customers’ requirements |
| Length | 2000,3000,6000mm or as per customers’ requirements |
| Surface | hairline |
| Standard | JIS,AISI,ASTM,GB,DIN |
| Delivery time | About 15 -30 days or based on the sales contract |
| MOQ | 1 Ton |
| Advantages | combining excellent high temperature properties with good ductility
and weldability |
Gauge and Thickness Inch:
| Gauge | Mild Steel | Aluminum | Galvanized Steel | Stainless Steel |
| | | | |
| 3 | 0.2391 | 0.2294 | | 0.2500 |
| 4 | 0.2242 | 0.2043 | | 0.2344 |
| 5 | 0.2092 | 0.1819 | | 0.2187 |
| 6 | 0.1943 | 0.1620 | | 0.2031 |
| 7 | 0.1793 | 0.1443 | | 0.1875 |
| 8 | 0.1644 | 0.1285 | 0.1680 | 0.1650 |
| 9 | 0.1495 | 0.1144 | 0.1532 | 0.1562 |
| 10 | 0.1345 | 0.1019 | 0.1382 | 0.1406 |
| 11 | 0.1196 | 0.0907 | 0.1233 | 0.1250 |
| 12 | 0.1046 | 0.0808 | 0.1084 | 0.1094 |
| 13 | 0.0897 | 0.0720 | 0.0934 | 0.0937 |
| 14 | 0.0747 | 0.0641 | 0.0785 | 0.0781 |
| 15 | 0.0673 | 0.0571 | 0.0710 | 0.0703 |
| 16 | 0.0598 | 0.0508 | 0.0635 | 0.0625 |
| 17 | 0.0538 | 0.0453 | 0.0575 | 0.0562 |
| 18 | 0.0478 | 0.0403 | 0.0516 | 0.0500 |
| 19 | 0.0418 | 0.0359 | 0.0456 | 0.0437 |
| 20 | 0.0359 | 0.0320 | 0.0396 | 0.0375 |
| 21 | 0.0329 | 0.0285 | 0.0366 | 0.0344 |
| 22 | 0.0299 | 0.0253 | 0.0336 | 0.0312 |
| 23 | 0.0269 | 0.0226 | 0.0306 | 0.0281 |
| 24 | 0.0239 | 0.0201 | 0.0276 | 0.0250 |
| 25 | 0.0209 | 0.0179 | 0.0247 | 0.0219 |
| 26 | 0.0179 | 0.0159 | 0.0217 | 0.0187 |
| 27 | 0.0164 | 0.0142 | 0.0202 | 0.0172 |
| 28 | 0.0149 | 0.0126 | 0.0187 | 0.0156 |
| 29 | 0.0135 | 0.0113 | 0.0172 | 0.0141 |
| 30 | 0.0120 | 0.0100 | 0.0157 | 0.0125 |
| 31 | 0.0105 | 0.0089 | 0.0142 | 0.0109 |
| 32 | 0.0097 | 0.0080 | 0.0134 | 0.0102 |
| 33 | 0.0090 | 0.0071 | | 0.0094 |
| 34 | 0.0082 | 0.0063 | | 0.0086 |
| 35 | 0.0075 | 0.0056 | | 0.0078 |
| 36 | 0.0067 | | | 0.0070 |
Chemical Composition:
| Grade | Chemical Composition (WT %) |
|
| Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel |
| 310S | ≤ 0.08 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 1.00 | 24.0 to 26.0 | 19.0 to 22.0 |
Physical Property:
| Physical Property |
| Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) | / | Hardness(HV/HB) | Density |
| ≥520MPa | ≥205MPa | ≥40% | / | 40 to 200HV | 7.98g/cm3 |
Surface Finish:
| Surface Finish | Definition | Application |
| 2B | Finished by heat treatment, pickling after cold rolling. Followed
by skin pass line to be more brighter and smooth surface | General application Medical instruments, Tableware |
| BA | Bright heat treament after cold rolling | Kitchen utensil, kitchenware, architectural |
| 8K | A mirror-like reflective surface by polishing with finer abrasives
over 800mesh | Construction, mirrors, plate sets, decoration elevators |
| HL | Finished by continuous linear polishing | Architectural purpose, Escalators, kitchenware, vehicles |
| NO.1 | Finished by hot rolling, annealing and picking, characterized by
white pickled surface | Chemical industry Equipment, industrail tanks |
| NO.4 | Polishing with NO.150 to NO.180 mesh abrasives specified in
JISR6001 | Kitchen utensils, Building Construction, Medical equipment |
Brand Cross Reference Table:
| GB NEW BRAND | JIS | ASTM | UNS | KS | BS EN | AS |
| 12Cr17Mn6Ni5N | SUS201 | 201 | S20100 | STS201 | 1.4372 | 201-2 |
| 12Cr18Mn9Ni5N | SUS202 | 202 | S20200 | STS202 | 1.4373 | - |
| 12Cr17Ni7 | SUS301 | 301 | S30100 | STS301 | 1.4319 | 301 |
| 06Cr19Ni10 | SUS304 | 304 | S30400 | STS304 | 1.4301 | 304 |
| 022Cr19Ni10 | SUS304L | 304L | S30403 | STS304L | 1.4306 | 304L |
| 06Cr19Ni10N | SUS304N1 | 304N | S30451 | STS304N1 | 1.4315 | 304N1 |
| 06Cr19Ni9NbN | SUS304N2 | XM21 | S30452 | STS304N2 | - | 304N2 |
| 022Cr19Ni10N | SUS304LN | 304LN | S30453 | STS304LN | - | 304LN |
| 10Cr18Ni12 | SUS305 | 305 | S30500 | STS305 | 1.4303 | 305 |
| 06Cr23Ni13 | SUS309S | 309S | S30908 | STS309S | 1.4833 | 309S |
| 06Cr25Ni20 | SUS310S | 310S | S31008 | STS310S | 1.4845 | 310S |
| 06Cr17Ni12Mo2 | SUS316 | 3016 | S31600 | STS316 | 1.4401 | 316 |
| 06Cr17Ni12Mo2Ti | SUS316Ti | 316Ti | S31635 | - | 1.4571 | 316Ti |
| 022Cr17Ni12Mo2 | SUS316L | 316L | S31603 | STS316L | 1.4404 | 316L |
| 06Cr17Ni12Mo2N | SUS316N | 316N | S31651 | STS316N | - | 316N |
| 022Cr17Ni13Mo2N | SUS316LN | 316LN | S31653 | STS316LN | 1.4429 | 316LN |
| 06Cr18Ni12Mo2Cu2 | SUS316J1 | - | - | STS316J1 | - | 316J1 |
| 022Cr18Ni14Mo2Cu2 | SUS316J1L | - | - | STS316J1L | - | - |
| 06Cr19Ni13Mo3 | SUS317 | 317 | S31700 | STS317 | - | 317 |
| 022Cr19Ni13Mo3 | SUS317L | 317L | S31703 | STS317L | 1.4438 | 317L |
| 06Cr18Ni11Tji | SUS321 | 321 | S32100 | STS321 | 1.4541 | 321 |
| 06Cr18Ni11Nb | SUS347 | 347 | S34700 | STS347 | 1.455 | 347 |
| 12Cr13 | SUS410 | 410 | S41000 | STS410 | 1.4006 | 410 |
| 20Cr13 | SUS420J1 | 420 | S42000 | STS420J1 | 1.4021 | 420 |
| 10Cr17 | SUS430 | 430 | S43000 | STS430 | 1.4016 | 430 |
Product Display:
Packing:
310S stainless steel cold rolled sheet 4x8 hairline finish 18 gauge
2types:
l Standard packing
l Fine packing
Typical applications include:
- Furnace parts
- Oil burner parts
- Carburising boxes
- Heat Treatment baskets and jigs
- Heat Exchangers
- Welding filler wire and electrodes
Factory and Machine Equipment:
We had our own factory to do slitting re-rolling and finish
treatment machine,PVC and interleaving paper we will using with our
machine for you,could protect stainless steel surface from damage
or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
WHY CHOOSE US:
Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will
show you the photos of products and package before you pay the
balance.
Q2: what is the terms of delivery?
A: FOB, CIF, CFR,
Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or
belts, we could also pack the goods as the customers' requirement.
Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within
7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after
receiving the deposit.
Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique
drawings, we could build the mold and fixtures.
Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is
available in stocks, however, the the transportation fee is borne
by buyer.
